Cleaning Wheels Properly
Have you ever bought a wheel cleaner from your local auto parts store, only to have it bleach out the finish on your wheels? It happens all the time. Here are 9 steps to properly cleaning your wheels.
9 Steps To Wheel Care
1. Wheels should be cleaned with warm water and mild non-detergent soap, using a cotton cloth or soft sponge applicator.
2. Do not use spray wheel cleaners, which can contain caustic chemicals that could stain and/or spot the finish of your wheels.
3. Let the wheel cool down completely before applying any cleaning product. Failing to do so may result in unwanted spots or stains.
4. Do not use tire cleaners containing harsh chemicals (any acid based cleaner), which can also stain or spot wheels.
5. Use only 100% cotton cloths; this avoids scratches caused by synthetic rags or cloths.
6. Always use a quality wheel polish like Metal Madness (available at Metro Wheels).
7. Carefully polish with the grain of the wheel. Baby powder in the final wipe down will remove fingerprints and oils left from polishing.
8. Occasionally clean the back side of the wheel to remove road grime, road salts, brake dust and grease.
9. For the final finish, apply a thin coat of car paste wax. Allow to dry and wipe off with a cotton cloth.
This article was posted on March 27, 2006
Disclaimer: The information presented and opinions expressed herein are those of the authors
and do not necessarily represent the views of ArticleCity.com and/or its partners.