ArticleCity.com - free articles for reprint.

CATEGORIES

Keyword Search

Article Title
Author's Name

SITE MENU


Cisco CCNA / CCNP Certification: Introduction To BGP Attributes
 by: Chris Bryant, CCIE #12933


BGP is one of the most complex topics you'll study when pursuing your CCNP, if not the most complex. I know from personal experience that when I was earning my CCNP, BGP is the topic that gave me the most trouble at first. One thing I keep reminding today's CCNP candidates about, though, is that no Cisco technology is impossible to understand if you just break it down and understand the basics before you start trying to understand the more complex configurations.

BGP attributes are one such topic. You've got well-known mandatory, well-known discretionary, transitive, and non-transitive. Then you've got each individual BGP attribute to remember, and the order in which BGP considers attributes, and what attributes even are... and a lot more! As with any other Cisco topic, we have to walk before we can run. Let's take a look at what attributes are and what they do in BGP.

BGP attributes are much like what metrics are to OSPF, RIP, IGRP, and EIGRP. You won't see them listed in a routing table, but attributes are what BGP considers when choosing the best path to a destination when multiple valid (loop-free) paths exist.

When BGP has to decide between such paths, there is an order in which BGP considers the path attributes. For success on the CCNP exams, you need to know this order. BGP looks at path attributes in this order:

Highest weight (Cisco-proprietary BGP value)

Highest local preference (LOCAL_PREF)

Prefer locally originated route.

Shortest AS_PATH is preferred.

Choose route with lowest origin code. Internal paths are preferred over external paths, and external paths are preferred over paths with an origin of "incomplete".

Lowest multi-exit discriminator (MED)

External BGP routes preferred over Internal BGP routes.

If no external route, select path with lowest IGP cost to the next-hop router for iBGP.

Choose most recent route.

Choose lowest BGP RID (Router ID).

If you don't know what these values are, or how they're configured, don't panic! The next several parts of this BGP tutorial will explain it all. So spend some time studying this order, and in part II of this free BGP tutorial, we'll look at each of these values in detail. Keep studying!

About The Author

Chris Bryant, CCIE #12933, is the owner of The Bryant Advantage (www.thebryantadvantage.com), home of free CCNA and CCNP tutorials, The Ultimate CCNA Study Package, and Ultimate CCNP Study Packages.

For a FREE copy of his latest e-books, “How To Pass The CCNA” and “How To Pass The CCNP”, visit the website and download your free copies!

This article was posted on December 28, 2005

<< Back to "Computers And Internet" Index

 

 


Disclaimer: The information presented and opinions expressed herein are those of the authors
and do not necessarily represent the views of ArticleCity.com and/or its partners.


Google
 
Web www.articlecity.com

  ZenSearch.com Make Money with this Breakthrough Affiliate Program Shop Online for Herbal Medicine and Other Health Supplements. Affordable Web Site Templates


Submit An Article || Submit Articles in Bulk || Submit Press Release || Syndicate Articles
Distribute Your Articles || Blogs || Free Magazines || Advertise on this site
Home || Privacy Policy || Terms of Use || Link To Us || Site Map || Contact Us

Copyright © 2001-2099 - Icthus.Net Communications